Voltage Divider & LED Resistor

Science & Tech

Three circuit calculations: the output of a voltage divider, the series resistor an LED needs, and the equivalent of resistors in series or parallel.

Vout = Vin × R₂ ÷ (R₁ + R₂), RLED = (Vsupply − Vf) ÷ I

With 12 V, R₁ = 10 kΩ and R₂ = 4.7 kΩ, the divider outputs 3.837 V and 0.816 mA flows through it.

A red LED (2 V, 20 mA) on 5 V needs a 150 Ω resistor, which dissipates 60 mW. Running a white LED (3.2 V) from 12 V gives 440 Ω, so you use the next standard value up, 470 Ω.

In series, resistances add up (100 + 220 + 330 = 650 Ω); in parallel, the result is lower than even the smallest one (56.9 Ω). Standard values come from the E12 series.

Results are for information only. For tax, salary, loan or health decisions, check official sources or ask a professional.

All Science & Tech tools